|
The Peristaltic Pump mainly consists of a pump head and a tube. The pump head consists of rollers which occlude the tube, draw and trap the fluid between rollers and expels the fluid from the pump. Together, the flow inducer and the tubing make the pump. These are self priming and safe dry running pumps ideally suited for shear sensitive and aggressive fluids. Accuracy of flow rate is maximum when small bore tubing and higher pump speed are used. Tube life is maximized when large bore tubing and slower pump speed are used.
MURHOPYE'S PROGRAMMABLE PERISTALTIC PUMPS are specially designed to provide accurate and reproducible flow rates for laboratory and industrial applications. These are self priming pumps and the liquid or gas to be pumped does not come in contact with any part other than tubing and are ideally suited for pumping corrosive liquids and sterilized medium, acids, alkali and antifoaming agents under aseptic conditions. These are built with an electronic flow rate control for continuous variation with forward/reverse control facility. These pumps are available in single or multi channel configuration.
Options:
· Digital Flow Indicator ·
· Controls: Built-in On-Off Timer with foot switch / Remote control with 4- 20 mA signal input from controller / Computer interfacing/ To match OEM requirement, panel mounting version
· Other tubing material to suit application can be offered
· Dosing pumps with fixed total flow can be offered
· Programmable Dispensers also available
MURHOPYE PERISTALTIC PUMPS
Models Flow Range Tubing Size Bore Dia.Range Features
101F Fixed speed low flow102V variable speed low flow 0.02 ml/min. to 100 ml/min. 0.8 microlitre/ min. to 166 ml/min. 0.5 mm to 4.8 mm 0.5 mm to 4.8 mm Forward/ Reverse Forward/ Reverse
201V/CC multi-channel 0.0006 ml/min to 300ml/min per channel 0.5 mm to 2.5 mm Available in 2, 4, 8, 12 channel models
301F fixed Speed Economy 302V variable speed Economy 0.3 ml/min to 450 ml/min. 0.06 ml/min. to 1500 ml/min 0.5 mm to 8 mm 0.5 mm to 8 mm Forward/ Reverse Forward/ Reverse
502V variable speed wide range 0.016 ml/min to 3000 ml/min. 0.5 mm to 8 mm Forward/ Reverse
601V variable speed high flow 3.6 ml/min. to 12.4 litres per min. 4.8 mm to 16 mm Forward / Reverse
ORDERING INFORMATION:
Murhopye offers pumps to cover a wide range of flows. Depending upon the application and the features desired you can choose from the models mentioned above. The following ordering code is useful in specifying your requirement.
XXXX - XXX - XXX - XX
Model - Tube bore - Drive speed - Speed ratio
101 F - 005 - 001 - 00 (for fixed speed)
102V - 008 - 005 - 10
201V - 016 - 010 - 25
301F - 032 - 020 - -
302V - 048 - 030 - -
502V - 064 - 040 - -
601V - 080 - 050 - -
- - 096 - 060 - -
- - 127 - 100 - -
- - 159 - 200 - -
- - - 300 - -
102V-008-001-25 indicates a variable speed low flow pump of model 102V with a top speed of 1 rpm and a tubing of 0.8 mm bore with speed variation 1:25.
Additionally, you can choose the control features you would desire in the pump from the information provided above.
For your requirements not covered in the above range or if you need assistance in arriving at a suitable model of MURHOPYE peristaltic pump please contact us with details of your requirement.
|
